HBRC-RACING

                                  PORSCHE 911 GT3 VIP CUP

Essentially this is a stock racing class for sport level cars, with a "one body-type" rule.

Anyone wanting to run the "latest and greatest" chassis can do so in 19Turn class.

An engraved cup will be awarded at the end of the year, to be returned at the conclusion of the following year's season.  Each year the winners name will be added to the cup.

The season will run for the enitre year at each on-road meeting, starting in January including all indoor and outdoor events, and will conclude at the end of the year in December.

Cars will be scrutineered at random meetings.  Drivers are responsible for ensuring their cars meet the rules. 

Non-conforming cars will be ineligible to compete until they meet the rules.

                                                                        RULES

• Only Stock 27Turn, closed endbell, 540 Johnson or Mabuchi Motors.
  Nothing that simply looks like a Johnson or Mabuchi (but isn't) will be allowed.
  
  
• Any radio system and ESC are allowed.
  
  
• Any gear ratio is allowed.
  
  
• Any 190mm "sport" type chassis -either kit or RTR will be allowed from any manufacturer.  Preference is for Tamiya cars including TL, TA, TB or TT series.
  Absolutely NO graphite plate chassis cars allowed, either as part of original kit or after-market part.  Kits such as TA05R or LOSI XXXS Graphite are also ineligible due to not meeting true "SPORT" spec.
  
  
• No hop-ups allowed apart from shock absorbers and swaybars.  Kit must be as close to original spec as possible. 
  Note -Some non-standard parts such as TT01 aluminium centre shaft that comes standard on TT01R may be allowed at scrutineer's discretion.  Any such parts must be generally intended for increased durability not performance.
  
  
• Only standard 26mm touring car on-road rubber or foam tyres and rims allowed.
  
  
• Only standard (non fan-assisted) motor heatsinks allowed.
  
  
• Body must be Tamiya Porsche 911 GT3 VIP: part number 51336.
  No other Porsche bodies are eligible -such as those from HPI.
  
  
• Poor sportsmanship/wreckless driving will not be tolerated.  This is a non-contact sport.  Drivers who persist with wreckless driving or corner cutting may be docked a lap.
  

                                                                   HBRC

                                    Super-Mini Class Rules

This is an additional class and as such ALL drivers must race in the STANDARD MINI class to enter Super-Mini.

• TAMIYA M01, M02, M03, M04, M05 two-wheel drive chassis only.
  
  
• Kit must be built as per original instructions with any hop-up part allowed, as long as it's a replacement part, not an additional part. 
  Only exclusions to this rule are motor heatsinks and sway bar kits both of which are allowed.
  
  
• Original Tamiya kit main chassis frame must be used.
  
  
• Overall car dimensions must remain as per original kit.
  
  
• Any 7.2V 6cell Ni-Cd or Ni-MH, or 7.4V Li-Po battery up to 5300mAh may be used, but must fit the original chassis design withoutmodification to chassis.
  
  
• Motor limit is 19Turn brushed.
  
  
• Any Servo, Radio, Receiver and ESC may be used.
  
  
• Any Tamiya M0 Mini Bodies may be used including Old Mini, New Mini, Suzuki Swift or new Fiat.  Bodies from other manufacturers may be used but must fit within similar dimensions.
  
  
• No additional aerodynamic devices such as wings may be used.
  
  
• Any standard touring car rims and tyres can be used - either rubber or foam - but must remain as Maximum 60mm diameter, and must not be noticeably wider than the body.

                                                                        HBRC

                            CORR Truck Class Rules

• Only Slash, Losi or SC10 (either kit or RTR) are permitted.
  No other Trucks masquerading as CORR Trucks will be permitted.
  Other kits may be added in the future providing they are intended for and compatible with this class.
  
  
• Parts can be replaced with the same or similar part (eg RPM arms, or Proline bodies for instance), but you can not add parts such as sway bars.  Nor will other non-compatible parts such as 1/8th Buggy shocks be allowed.
  
  
• Rims and tyres are to be the stock Traxxas or Associated parts, or the Proline Epic rims and Switch tyres. 
  No JConcepts Goosebumps, nor 17mm adaptors & 1/8th Buggy rims/tyres.
  
  
• You can replace the servo, ESC, radio or receiver.
  
  
• Motors limited to 12Turn brushed 550 (long can with a fan), or 15 turn 540 (standfard type motor).  Any type of heatsink are permitted.
  
  
• Battery packs to be 7.2V 6cell Ni-Cd or Ni-MH, or 7.4V Li-Po battery.
  No 7cell packs.